Why Choose Custom Furniture Over Designer & Retail Furniture?

by | Feb 2, 2021 | Custom Furniture, Woodworking | 0 comments

custom furniture
Custom bed by Barney & Carey Co.

The availability of new furniture runs the gamut from the cheapest particle board garbage one can imagine, to that of extremely well-respected, high-end commercial manufacturers…and everything in between. Premiere furniture companies provide striking, glossy catalogs, and showrooms in the most expensive enclaves of retailing.

The quality of their products is usually impeccable. Pricing, however, is not for the faint of heart, and makes it all but impossible to “comparison shop.” When one shops on Newbury Street, Madison Avenue, or Rodeo Drive, they will be paying dearly for those posh catalogs and outrageous rents! Some retailers congregate in “design centers,” which are usually not open to the public, unless one is accompanied by an interior designer or retailer registered at that center. Such designers will charge hefty fees for their design services, but sometimes pass their discount on the furniture on to their customers, while others charge full retail for purchases, including their services. One way or the other, the customer will pay through the nose! This is the highest of the “high end.” Being a retailer member of a few design centers, I have purchased some heirloom quality pieces there with supreme satisfaction…after the pain of our “discounted” cost.

But what are your alternatives?

Obviously, furniture stores are everywhere, fighting for your dollar. With some careful shopping, you can find decent manufactured furniture that will not break your bank—and it’s easy to determine which retailers are reputable…and which ones are not. Let’s say you want something really nice, but do not have an open checkbook where cost is no concern (must be nice)!

I highly recommend looking into custom furniture! Smaller, custom woodworkers—like Barney & Carey—can usually reproduce just about anything in those fancy showrooms, at drastically lower prices. Not cheap, mind you; but much lower. You also have the added benefit of ordering precisely what you want, in size and materials.

A few years ago, a customer approached me about building a huge dining room table for his mansion in Newport. He had gotten quotes from a couple of New York City’s most respected retailers. He told me, “I don’t are about the cost; I want perfection. Can you promise that?” We created the table to his utter satisfaction, at approximately 70% of his NYC quotes!

custom furniture

Many people think that custom furniture will come with a crazy price tag; not always.

Give us the opportunity to quote your dream- you will be surprised at what we can do, and for how much!

Popular Articles

Furniture: Buy New or Restore?

Back in the 1990s, Barney & Carey accidentally got into the furniture repair and refinishing business. Cindy and I were regulars at the highly...

Subscribe to Our Blog

Get Social With Us

Order Custom Cabinet Parts

Contact Barney & Carey Co.

Give Us a Call

(508) 580-9766

Shoot Us an Email

info@barneyandcarey.com

Our Location

491 West Main St
AvonMA 02322

Business Hours

Monday: 7:30 am - 3:30 pm
Tuesday: 7:30 am - 3:30 pm
Wednesday: 7:30 am - 3:30 pm
Thursday: 7:30 am - 3:30 pm
Friday: 7:30 am - 3:30 pm
Saturday: 8:00 am - 12:00 pm
Sunday: Closed

Cabinet Order Summary

${customerInfoHTML} ${cabinetDetailsHTML} ${printContent} `); printWindow.document.close(); // Wait for content to load before printing printWindow.onload = function () { printWindow.print(); }; } // Set up form field listeners function setupFormListeners() { // Prevent duplicate listeners by removing existing ones first if (window.cabinetVisListenersSetup) { return; // Already setup, don't duplicate } // Listen for changes on all form inputs in the repeater sections const form = document.querySelector("#form_cab-price-calc"); if (form) { // Mark that we've setup listeners to prevent duplicates window.cabinetVisListenersSetup = true; // Use event delegation to catch changes in current and future repeater sections form.addEventListener("change", function (e) { if (e.target.name && e.target.name.includes("item_meta[42]")) { updateVisualization(); } // Also listen for material changes (field 105) if (e.target.name && e.target.name.includes("item_meta[105]")) { updateVisualization(); } // Also listen for type changes (field 45) if (e.target.name && e.target.name.includes("item_meta[45]")) { updateVisualization(); } // Also listen for delivery option changes if (e.target.name && e.target.name.includes("item_meta[113]")) { updateVisualization(); } }); form.addEventListener("input", function (e) { if (e.target.name && e.target.name.includes("item_meta[42]")) { updateVisualization(); } }); // Watch for repeater add/remove buttons const observer = new MutationObserver(function (mutations) { mutations.forEach(function (mutation) { if ( mutation.addedNodes.length || mutation.removedNodes.length ) { // Check if repeater sections were added/removed const hasRepeaterChanges = Array.from( mutation.addedNodes, ) .concat(Array.from(mutation.removedNodes)) .some( (node) => node.nodeType === 1 && (node.classList?.contains( "frm_repeat_sec", ) || node.querySelector?.( ".frm_repeat_sec", )), ); if (hasRepeaterChanges) { setTimeout(updateVisualization, 100); // Small delay to ensure DOM is updated } } }); }); observer.observe(form, { childList: true, subtree: true, }); } } // Initialize function init() { const container = document.getElementById("sheetVis"); if (!container) { // If sheetVis doesn't exist yet, wait for it const observer = new MutationObserver(function (mutations) { mutations.forEach(function (mutation) { if (mutation.addedNodes.length) { Array.from(mutation.addedNodes).forEach( function (node) { if ( node.nodeType === 1 && (node.id === "sheetVis" || node.querySelector?.("#sheetVis")) ) { observer.disconnect(); // Stop observing updateVisualization(); setupFormListeners(); } }, ); } }); }); observer.observe(document.body, { childList: true, subtree: true, }); return; // Exit early if container not found } // Container exists, proceed normally updateVisualization(); setupFormListeners(); } // Handle Formidable Forms multi-step navigation function handleFormPageChange() { // Reset listener setup flag to allow re-initialization window.cabinetVisListenersSetup = false; // Small delay to ensure DOM is fully updated after page change setTimeout(function () { const container = document.getElementById("sheetVis"); if (container) { updateVisualization(); // Re-setup form listeners in case they were lost during navigation setupFormListeners(); } else { // If container doesn't exist, re-run full initialization init(); } }, 50); } // Additional fallback detection for form changes function setupGlobalFormWatcher() { // Watch for any significant DOM changes that might indicate form step changes const globalObserver = new MutationObserver(function (mutations) { let shouldReinit = false; mutations.forEach(function (mutation) { if (mutation.addedNodes.length > 0) { Array.from(mutation.addedNodes).forEach(function (node) { if (node.nodeType === 1) { // Check for form content changes or step navigation if ( node.classList?.contains("frm_form_content") || node.querySelector?.(".frm_form_content") || node.id === "form_cab-price-calc" || node.querySelector?.("#form_cab-price-calc") ) { shouldReinit = true; } } }); } }); if (shouldReinit) { handleFormPageChange(); } }); globalObserver.observe(document.body, { childList: true, subtree: true, }); } // Export global interface window.cabinetVis = { init: init, update: updateVisualization, getCabinets: extractCabinetData, handleFormPageChange: handleFormPageChange, debug: function () { console.log("Cabinet Visualization Debug Info:", { containerExists: !!document.getElementById("sheetVis"), formExists: !!document.querySelector("#form_cab-price-calc"), listenersSetup: !!window.cabinetVisListenersSetup, jQueryAvailable: typeof jQuery !== "undefined", cabinetCount: extractCabinetData().length, }); }, }; // Handle Formidable Forms multi-step navigation if (typeof jQuery !== "undefined") { jQuery(document).ready(function ($) { // Use both event delegation and direct binding for better compatibility $(document).on("frmPageChanged", function (event, form, response) { console.log( "Cabinet Vis: Formidable form page changed detected", ); handleFormPageChange(); }); // Also listen for form completion which might trigger on some step changes $(document).on("frmFormComplete", function (event, form, response) { setTimeout(function () { const container = document.getElementById("sheetVis"); if (container) { console.log( "Cabinet Vis: Form complete, updating visualization", ); updateVisualization(); } }, 100); }); }); } else { console.log( "Cabinet Vis: jQuery not available, relying on DOM observation for form changes", ); } // Setup global form watcher as fallback setupGlobalFormWatcher(); // Auto-initialize if (document.readyState === "loading") { document.addEventListener("DOMContentLoaded", init); } else { init(); } })();