CNC cabinet parts, cut to your specs · Avon, MA
Stop cutting cabinet boxes. Outsource the parts, keep the job.
Design, price and order CNC-cut cabinet components online — no salesperson, no waiting on a quote. Most orders turn around in 2–4 days, not including shipping — and almost always for less than building the boxes in your own shop.
Or call (508) 580-9766
Free to use · No account needed · Save your quote as a PDF and order it later
Since 1922
Four generations of lumber & millwork
CNC-cut to spec
Repeatable parts, every sheet, every run
No minimums
One cabinet or a whole kitchen
2–4 day turnaround
On most orders, not including shipping
What we build for you
Start with the boxes. We’ll help with the rest.
Use the form to spec your cabinet boxes — CNC-cut, dadoed, drilled and flat-packed to your exact dimensions. Doors, face frames and hardware are things we make too; those we like to talk through with you, so give us a call and we’ll quote them right alongside your boxes.
Order Online
- Cabinet box components
- Your choice of box material
- Shelves & shelf-pin holes
- Predrilled mounting holes
- Toe kick & base
Just give us a call
- Doors & drawer fronts
- Face frames
- Drawer boxes
- Soft-close hinges & slides
- Finishing, assembly, install
CNC cabinet parts, cut to your specs · Avon, MA
Offer custom cabinetry without becoming a cabinet factory.
You know how much shop time disappears into cutting boxes, drawing sheet layouts and drilling hardware holes. That work is repetitive, equipment-heavy, and it is not what your client is paying you for.
Hand it to us. You keep the design, the client, the finishing, the assembly and the install — the parts of the job with the margin in them. We become the production side of your shop, on demand, with no equipment to buy and no payroll to carry.
Built For
General Contractors | Remodelers | Cabinet Installers | Small Cabinet Shops | Finish Carpenters | Experienced DIYers With Limited Shop Space
Put your valuable craftsmanship resources to work on other facets of your project, with us supplying the components much faster.
Keevin Geller, CEO — Barney & Carey Company
Take cabinet work without owning a CNC
Quote jobs you would normally pass on, and price them off a real number instead of a guess.
Stop tying up skilled hands on box parts
Your cabinet maker can go back to face frames, doors, assembly and install.
Quit paying for wasted plywood
We nest every part into the most economical layout on the sheet. No more hand-drawn cut diagrams on expensive veneer ply.
Usually cheaper than making them yourself
Full-time CNC production and better yield per sheet — before you even count the shop hours you got back.
Take on more work than your shop can build
A 2–4 day turnaround on most orders, not including shipping, means your own capacity stops limiting your calendar.
The whole form, up front
It’s three sections. That’s it.
People see a scroll bar and assume it’s an hour of work. It isn’t. Here’s every section you’ll be asked to complete, and roughly how long each takes. Nothing is locked in until you submit, and you can print your summary to PDF at any point and pick it back up later without re-entering anything.
01
~2 min
Customer Information
Name, company, email, phone, address. Contractors can add a PO# and Job ID so the paperwork matches your job file.
- Billing + ship-to address
- Pickup, our delivery, or freight
02
~5 min for the first cabinet
Cabinet Information
The real work, and the part that pays off. Box type, outside dimensions, interior material, shelves and base. Every added cabinet goes faster than the last.
- Pricing updates as you choose
- Measurement diagram built-in
03
~2 min
Payment Information
Review your itemized summary, then submit. Not ready? Print the summary to PDF and submit the exact same order whenever you are.
- Itemized, line-by-line total
- Save as PDF, order later
The whole form, up front
Grab these five things first
Almost every abandoned order is someone who got to a field they didn’t have an answer for. Two minutes of prep and you’ll finish in one sitting.
Your interior box material
MDF Plycor, Prefinished Maple, Hardwood Plywood or Melamine Plycor. The single biggest lever on your price.
A cabinet count
How many bases, walls, tall units and drawer banks. A rough sketch of the wall is plenty.
Outside cabinet box dimensions
Overall width, height and depth of each box — outside face to outside face, to the nearest 32nd of an inch.
Delivery or pickup
Job-site or shop? Residential or commercial? Freight quotes are handled separately.
Your PO# and Job ID, if you work off them
Optional, but adding them now means your invoice, packing list and pallet tags all match your job file when the parts arrive.
Step by step
How to use the order form
Six screens, start to finish. Nothing here is a trick question — and if a field stumps you, the shop number is on every step.
01
Fill in who you are and where it’s going
Contact details, billing address, and your delivery choice: pick up in Avon, our own delivery truck, or freight. Check “ship to” if the parts go somewhere other than the invoice address.
Tip: contractors — put your PO# and Job ID in here now, not later.
02
Pick your cabinet type
Base, wall, tall, sink base, drawer bank, corner. Choosing the type first is what filters the rest of the form down to only the fields that apply to that cabinet.
Tip: order one wall at a time so your list stays easy to check.
03
Enter width, height and depth
Outside cabinet box dimensions, in inches, to the nearest 32nd. The measurement guide button sits right above the form — open it and match your numbers to the diagram before you type.
Tip: these are outside box dimensions, not the wall opening — leave yourself scribe and filler room.
04
Choose your box material, shelves and base
Interior box material, edge banding, shelf count and placement, toe kick and base. Watch the price move as you go — you can trade a spec up or down before you ever commit. Doors, drawer fronts and hardware aren’t part of this form; call us and we’ll quote them alongside.
Tip: prefinished maple saves you from finishing box interiors on site — usually worth the upcharge.
05
Add your next cabinet — or duplicate this one
Describe as many cabinets as you like and give each one a number, so your list and ours match on the shop floor. Repeat boxes take seconds, and the running total updates as the order grows.
Tip: this is where the first five minutes pays for itself.
06
Review the summary, then submit — or save it for later
The last page itemizes every cabinet and every option. Submit it and we start scheduling. Not ready? Hit print, save the PDF, and submit the same order later without re-entering a thing.
Tip: send the PDF to your client for approval before you order.
Measurement guide
If you can read a tape, you can fill out this form.
Every dimension the form asks for is labeled on one diagram, and it’s available from inside the form itself — no hunting, no separate download. Box dimensions are taken outside face to outside face, and every field accepts measurements down to the nearest 32nd of an inch.
WIDTH, HEIGHT, DEPTH
Oustide dimensions of the box, to the nearest 32nd of an inch.
TOE KICK HEIGHT
Standard is 4½” unless you specify
SHELF PLACEMENT
Adjustable shelves get shelf-pin holes; fixed shelves don’t
Unsure of a measurement or a term? Call us before you submit.
Cabinets and parts are non-refundable once they’re made, so we’d much rather check the numbers with you first — (508) 580-9766.
What happens after you hit submit
Your numbers go straight to the CNC.
The dimensions you type in the form become the toolpath. Every part is nested into the most economical layout on the sheet, machined, dadoed and drilled for your mounting hardware, then palletized flat for pickup or delivery. Most orders are done in 2–4 days, not including shipping. Need doors, face frames, drawer boxes, hardware, finishing or install? We do all of it — just not through this form. Call and we’ll quote it alongside your boxes.
FLAT-PACKED ON A PALLET
Ready to assemble, pick up in Avon or have it delivered.
PREDRILLED MOUNTING HOLES
Bored in the shop to your hardware spec, not on site.
MACHINE, NOT HAND CUT
Repeatable to the 32nd of an inch across an entire run.
ONE CABINET OR A HUNDRED
Same process, same tolerances, no minimum.
Materials & finishes
Four box materials. Pick the one that fits the job.
Four interior box materials, and the choice is the single biggest lever on your total. Here’s the short version of what each one is good for.
MDF Plycor
MDF panel that machines to a crisp, clean edge and stays dead flat. The economical choice when the interior will be painted.
Best value, paint-ready
Prefinished Maple
Shows up sealed and ready to install. No finishing the insides of boxes on site. The most popular pick for kitchens by a wide margin.
No finishing on site
Hardwood Plywood
Light, stiff, and it holds a screw. Real wood faces for stain-grade work and open shelving where the interior is on display.
Strongest, stain grade
Melamine Plycor
A tough, wipe-clean thermally fused surface. The workhorse for garages, laundry, utility and commercial casework.
Wipe-clean & durable
Not sure which of the four fits? Tell us the room and the finish you have in mind — (508) 580-9766 — and we’ll point you at the right material before you spend time in the form.
No pressure
Not ready to check out? Save your quote as a PDF.
Play with dimensions, species, shelf heights and base types as long as you like — nobody is watching the clock or waiting on your decision. When the numbers look right, press print on the last page and save the summary as a PDF.
Send it to your client for approval. Check it against the job budget. Sit on it a week. When you’re ready, submit it as an order — without re-entering a single field.
The work
What comes off the floor in Avon
Shop photos and finished installs — the same cabinets the form orders.
Five minutes now, or a week of phone tag. Your call.
Contact Barney & Carey Co.
Give Us a Call
(508) 580-9766
Shoot Us an Email
info@barneyandcarey.com
